UNS.S32100-SS321 Wire Mesh_METART BUILDING TECH CO., LTD

Architectural Decor Wire Mesh
Cabinet Door Mesh / Wall Cladding Mesh Lift Cabin Cladding Mesh / Elevator Mesh Decorative Wire Mesh Wire Mesh Railing Budget Architectural Wire Mesh Soft Architectural Mesh Framed Decor Woven Wire Screens Architectural Wire Mesh Portraits Crimped Wire Mesh Stainless Steel Security Wire Mesh Stainless Steel Welded Wire Mesh Laminated Glass Infill Metal Fabric Architectural SS Wedge Wire Screen Custom Wire Mesh Fabrication
Industrial Wire Mesh & Filters
Stainless Steel Wire Mesh & SS Wire Cloth Brass-Copper-Bronze Mesh & Wire Cloth Special Alloy Wire Mesh & Wire Cloth Quarry Screen & Steel Wire Mesh & Gal Epoxy Powder Coated Steel Mesh for Filter Mosquito-Fly-Insect Screen Wire Mesh Bushfire Ember Wire Mesh & Perf Sheet Custom-Made Wire Mesh Cylinders & Filters
Perforated Metal & Expanded Metal
Standard Round Hole Perforated Sheets Square Hole Perforated Metal Decorative Perforated Sheet Decorative Laser Cut Screens Pic Perf Sheet-Picture Perforation Architectural Expanded Metal 1.8MM Perforated Aluminium Security Mesh 2.0MM Perforated Aluminium Security Mesh Heavy DVA Privacy AL Security Mesh Aluminium Light DVA Mesh Water Wall Mesh / Waterfall Mesh Precision Etching Micro Hole Perforated Plate
Architectural Cable Mesh Series
Woven Wire Drapery / Cable Rod Wire Mesh Stainless Steel Cable Netting
Architectural Metal Curtain Series
Metal Spiral Tension Mesh Metal Curtains / Metal Coil Drapery Metal Ring Mesh Curtain Anodized Aluminum Chain Curtain
Perf Plank Safety Grating & Others
Anti-Slip Perf Metal Planks & Stair Treads Steel & Stainless Steel Bar Grating

UNS.S32100-SS321 Wire Mesh

Specification

Material: SS321 Wires

Type: Industrial Wire Mesh

Weave Pattern: Plain Weave, Twill Weave, Dutch Weave, Crimped Weave, etc.

Mesh Count: Custom made.

Wire Diameter: Custom made.

Width: Custom made

Length: 30M and other custom length.

GET A QUOTE

Introduction

SS 321 woven wire mesh, also known as UNS.S32100 wire mesh, AISI 321 wire mesh, SUS321 wire mesh, 1.4541 stainless steel wire mesh, is made of grade 321 stainless steel wires which is a basic austenitic 18/8 stainless steel (Grade 304) stabilized by Titanium addition. This grade is introduced because it is not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850 °C.
SS 321 wire mesh is the grade of choice for applications in the temperature range of up to about 900 °C, combining high strength, resistance to scaling, and phase stability with resistance to subsequent aqueous corrosion.
A limitation with grade 321 is that titanium does not transfer well across a high-temperature arc, so it is not recommended as a welding consumable. In this case grade 347 is preferred - the niobium performs the same carbide stabilization task but can be transferred across a welding arc. Grade 347 is, therefore, the standard consumable for welding 321.

STANDARDS

INDUSTEEL TRADEMARKS

UNS

ASTM/AISI

EURONORMS EN

SUS

…

UNS.S32100

321

1.4541

X6CrNiTi18-10

321

SS32110 wire mesh, UNS S32100 wire mesh, Chemical Composition, %

Cr	Ni	C	Si	Mn	P	S	Ti	Fe
17.0-19.0	9.0-12.0	.08Max	1.0Max	2.00Max	.045Max	.03Max	5×(C+N)- 0.70	Balance

Physical Properties of Grade 321

Density	Electrical Resistivity	Thermal Conductivity	Magnetic Permeability	Specific Heat	Melting Range
g/cm³	µΩ·cm	W/mK	H/m at 200 Oersteds	kJ/kg/K	°C
8.09	72	16.0	≤1.02	0.50	1371-1399

Specification List:

Mesh Count /Inch	Wire Diameter		Aperture		Open Area %	Weight (LB) /100 Square Foot
Mesh Count /Inch	Inch	MM	Inch	MM	Open Area %	Weight (LB) /100 Square Foot
1 × 1	.080	2.03	.920	23.37	84.6	41.1
2 × 2	.063	1.60	.437	11.10	76.4	51.2
3 × 3	.054	1.37	.279	7.09	70.1	56.7
4 × 4	.063	1.60	.187	4.75	56.0	104.8
4 × 4	.047	1.19	.203	5.16	65.9	57.6
5 × 5	.041	1.04	.159	4.04	63.2	54.9
6 × 6	.035	.89	.132	3.35	62.7	48.1
8 × 8	.028	.71	.097	2.46	60.2	41.1
10 × 10	.025	.64	.075	1.91	56.3	41.2
10 × 10	.020	.51	.080	2.03	64.0	26.1
12 × 12	.023	.584	.060	1.52	51.8	42.2
12 × 12	.020	.508	.063	1.60	57.2	31.6
14 × 14	.023	.584	.048	1.22	45.2	49.8
14 × 14	.020	.508	.051	1.30	51.0	37.2
16 × 16	.018	.457	.0445	1.13	50.7	34.5
18 × 18	.017	.432	.0386	.98	48.3	34.8
20 × 20	.020	.508	.0300	.76	36.0	55.2
20 × 20	.016	.406	.0340	.86	46.2	34.4
24 × 24	.014	.356	.0277	.70	44.2	31.8
30 × 30	.013	.330	.0203	.52	37.1	34.8
30 × 30	.012	.305	.0213	.54	40.8	29.4
30 × 30	.009	.229	.0243	.62	53.1	16.1
35 × 35	.011	.279	.0176	.45	37.9	29.0
40 × 40	.010	.254	.0150	.38	36.0	27.6
50 × 50	.009	.229	.0110	.28	30.3	28.4
50 × 50	.008	.203	.0120	.31	36.0	22.1
60 × 60	.0075	.191	.0092	.23	30.5	23.7
60 × 60	.007	.178	.0097	.25	33.9	20.4
70 × 70	.0065	.165	.0078	.20	29.8	20.8
80 × 80	.0065	.165	.0060	.15	23.0	23.2
80 × 80	.0055	.140	.0070	.18	31.4	16.9
80 × 80	.0047	.119	.0078	.198	39	11.39
90 × 90	.005	.127	.0061	.16	30.1	15.8
100 × 100	.0045	.114	.0055	.14	30.3	14.2
100 × 100	.004	.102	.0060	.15	36.0	11.0
100 × 100	.0035	.089	.0065	.17	42.3	8.3
110 × 110	.0040	.1016	.0051	.1295	30.7	12.4
120 × 120	.0037	.0940	.0064	.1168	30.7	11.6
150 × 150	.0026	.0660	.0041	.1041	37.4	7.1
160 × 160	.0025	.0635	.0038	.0965	36.4	5.94
180 × 180	.0023	.0584	.0033	.0838	34.7	6.7
200 × 200	.0021	.0533	.0029	.0737	33.6	6.2

Application

-Furnace parts
-Heat Exchangers
-High-temperature mineral processing
-Refinery equipment
-Aircraft components.

GET A QUOTE

Specification

Introduction

You May Also Like

Application

Product

Contact Us