METART-WW47 Hybrid Woven Decor Screen Mesh_METART BUILDING TECH CO., LTD

METART-WW47 Hybrid Woven Decor Screen Mesh

Specification

Material: Stainless steel 304 or 316 + Real Brass Wires

Type: Rigid Wire Mesh

Opening Area: 50%

Weight: Approx 8.8kg/Square Meter

Finish: Mill Finish (Original stainless steel and brass finish)

Screen Width: Within 2000MM

Screen Length: Within 4000MM

GET A QUOTE

Introduction

METART WW47 is made of double brass warp wire groups and twisted stainless steel weft wires. The twist-designed stainless steel wires offer this wire mesh pattern a fantastic 3D appearance as if a shoal of fish swimming in the ocean.

Adopting 2.72mm stainless steel hard wires and double 1.95mm brass wires, this decorative mesh pattern is super rigid and suitable for the architectural purpose.

This décor screen pattern can be used as decorative railing infill mesh panels, commercial building fencing infill mesh, shopfitting partition screen panels, office divider screen mesh, and wall cladding architectural mesh, etc.

Please refer to the following specifications.

Material	Stainless Steel 304 or 316 wires + Real brass wires
Type	Rigid wire mesh
Double Warp Brass Wire Diameter	1.95mm x double wires
Single Weft SS Wire Diameter	2.72mm
Vertical Hole Centers	8.1mm
Horizontal Hole Centers	16.4mm
The total thickness of the fabric	5.2mm
Opening Area	50%
Block out	50%
Privacy Rate	50%
Weight	8.8kg/Square Meter
Finish	Mill Finish（Original stainless steel and brass color）
The way of cutting	Straight Cut
All optional ways of cut	Straight Cut Only
All optional Finish	Mill Finish（Original stainless steel and brass color）
Custom specifications and Mini order accepted.
Note: All the measurements including wire thickness, diameter, opening, and overall thickness are nominal numbers. The actual specification might have a tiny bit of tolerance according to fabrication

Application

GET A QUOTE

Specification

Introduction

You May Also Like

Application

Product

Contact Us